2019 SDconnect C4 PLUS vs 2018 SD connect C4
第1页/共1页
2019 SDconnect C4 PLUS vs 2018 SD connect C4
Hello to all.
The old SD connect C4 (SP100-D) will stop production soon.
And you will have SD connect C4 PLUS (SP100-E) instead.
The new sdconnect is released in the year 2019, features the old c4 and DoIP communication.
in detail...
What is SD connect C4 PLUS:
http://www.chinacardiags.com/wholesale/mb-sd-c4-compact-4-mb-star-support-doip.html
What is SDconnect C4:
http://www.chinacardiags.com/wholesale/mb-sd-c4-connect-compact-4-star-diagnosis-with-software.html
Both share the same look.
But the C4 PLUS with PCB updated, can communicate with vehicles with DOIP like the newest hybrid W222, W205.
Look here:
This is the new components added on C4 PLUS on PCB.
2019 SD connect C4+ PCB:
source:
http://www.chinacardiags.com/wholesale/mb-sd-c4-compact-4-mb-star-support-doip.html
2018 SD connect C4 PCB:
source:
http://www.chinacardiags.com/wholesale/mb-sd-c4-connect-compact-4-star-diagnosis-with-software.html
What is DoIP and what's good?
What is DoIP?
Short and simple: “DoIP is the packaging of diagnostic messages
in Ethernet frames for communication of a diagnostic tester with a vehicle”
• DoIP is a standardized diagnostic transport protocol according to
ISO 13400
• DoIP is used in combination with the standardized diagnostic protocol
UDS (ISO 14229-5: UDSonIP)
• Services of UDSonIP are identical to UDSonCAN
• DoIP with Ethernet 100 Base-TX instead of CAN enables substantial
higher bandwidth
• Vehicle access with DoIP is backwards compatible using discretionary
pins of the existing diagnostic connector
• DoIP enables easy integration into various network structures,
even with WLAN
What's good of DoIP?
Performant handling of huge data volumes
Time-saving at ECU Flash Programming
Cost-efficient because no VCI is necessary
Simple integration to IT Infrastructure
Flexible use because of standardized communication
Integrated with other standards for vehicle diagnosis
Future-proof technology enables various use cases
The old SD connect C4 (SP100-D) will stop production soon.
And you will have SD connect C4 PLUS (SP100-E) instead.
The new sdconnect is released in the year 2019, features the old c4 and DoIP communication.
in detail...
What is SD connect C4 PLUS:
http://www.chinacardiags.com/wholesale/mb-sd-c4-compact-4-mb-star-support-doip.html
What is SDconnect C4:
http://www.chinacardiags.com/wholesale/mb-sd-c4-connect-compact-4-star-diagnosis-with-software.html
Both share the same look.
But the C4 PLUS with PCB updated, can communicate with vehicles with DOIP like the newest hybrid W222, W205.
Look here:
This is the new components added on C4 PLUS on PCB.
2019 SD connect C4+ PCB:
source:
http://www.chinacardiags.com/wholesale/mb-sd-c4-compact-4-mb-star-support-doip.html
2018 SD connect C4 PCB:
source:
http://www.chinacardiags.com/wholesale/mb-sd-c4-connect-compact-4-star-diagnosis-with-software.html
What is DoIP and what's good?
What is DoIP?
Short and simple: “DoIP is the packaging of diagnostic messages
in Ethernet frames for communication of a diagnostic tester with a vehicle”
• DoIP is a standardized diagnostic transport protocol according to
ISO 13400
• DoIP is used in combination with the standardized diagnostic protocol
UDS (ISO 14229-5: UDSonIP)
• Services of UDSonIP are identical to UDSonCAN
• DoIP with Ethernet 100 Base-TX instead of CAN enables substantial
higher bandwidth
• Vehicle access with DoIP is backwards compatible using discretionary
pins of the existing diagnostic connector
• DoIP enables easy integration into various network structures,
even with WLAN
What's good of DoIP?
Performant handling of huge data volumes
Time-saving at ECU Flash Programming
Cost-efficient because no VCI is necessary
Simple integration to IT Infrastructure
Flexible use because of standardized communication
Integrated with other standards for vehicle diagnosis
Future-proof technology enables various use cases
第1页/共1页
您在这个论坛的权限:
您不能在这个论坛回复主题