PSA IMMO tool: What is it, How to use, Car List, Review

User manual: PSA IMMO tool & PIN code calculator for Peugeot and Citroen from 2001 to 2018
Definition:
PSA IMMO tool is able to extract the pin code from PSA engines
You can read the pin code from the ECU memory of all the engines
Control Units, Sagem, Johnson controls and Valeo BSI units

Car list:
Peugeot and Citroen from 2001 to 2018
Function:
The device has two main functions: one is the calculation of the pin code through obd, which detects the signal from bsi to ecu. The obd pin code needs the operating key.
Another function is the programming of the emulator
It allows you to enter the postal code in the EMU so that the car operates without a key.
How to:
The device has two modes of operation:
Mode-1 Calculator:
Connect the OBD Cable supplied to the car
and select "calculator"
and then turn the ignition 8 times.
Each time the cycle the ignition against will increase.
In the 8th calculator, start working!
Wait 5 minutes and the security pin will be displayed on the screen
Mode-2 emulator: 
The emulator function will only emulate an operation key once the pin has been calculated.
This can be useful for diagnosing problems with the security system.
Not all cars can be made through the diagnostic port
some cars require the calculator to connect to the CAN H and L cables under the hood.
Basically, if a can H and L connection is available in the diagnosis
Then, you can use the calculator through the OBDII port
If not, it requires a direct connection.
The KP008 has a small LCD backlit small keyboard to navigate the menu a rear
Magnet to help test and secure the device when working under the hood / hood, an OBD
Connector and cable and an additional cable / connectors to work with vehicles that do not
Have CAN BUS located inside the OBD diagnostic connector.
Application:
The device can operate on all models based on Peugeot and Citroen from 2001 to 2015 as indicated in
The Application Guide on our website Applications are updated on a regular basis so that
Always check the latest version to make sure you have the information updated before
Try reading the pin code.
The device operates on 2005/2006 vehicles using the OBD port if bus can be available on the
OBD connector for vehicle, however for vehicles before this you can make a direct connection to
The ECU motor connector can connect cables to allow communication with the ECU immobilizer BSI.
The device only works on Peugeot and Citroën derived models and can not read the pin
Fiat Code or Toyota derived models such as the 107 C1 and Scudo as examples
The device is protected by international copyright laws and patent pending status for its exclusive
Design and software
The calculator will work in cars from 2001 until today, as long as it is the type of ORIGINAL PSA engine found in Peugeot and Citroen
Package:
1 x Handholder
1 x OBDII Lead
1 x CAN connection cables
Images in the test:


Source: http://www.obd2diy.fr/wholesale/psa-immo-tool-mark-peugeot-citroen-cle-simulateur.html