UP400 Programmer User Manual: Read/Write Data with OtoSys IM600

向下

UP400 Programmer User Manual: Read/Write Data with OtoSys IM600

帖子 由 Admin 于 周五 九月 07, 2018 11:39 am

UP400 Programmer User Manual for newbies:
What is UP400 Programmer
What is UP400 Programmer used for
What eeprom transponder can be R/W
UP400 Programmer test report
In detail...
What is UP400 Programmer:
The UP400 is specially designed to read transponder data (including Mercedes Benz infrared smart key), clone and generate exclusive keys, read/write on-board EEPROM data, and read/write Freescale 9S12 MCUs.
By working with diagnostic tool and PC that are both loaded with programmer software, the UP400 can read/write transponder data quickly and accurately.

Source: http://www.chinacardiags.com/
What is UP400 Programmer used for:


  1. DC Port – provides 12V DC power supply.
  2. USB Port – provides data communication and 5V DC power supply.
  3. DB 26-Pin Port – connects with the Mercedes Benz infrared cable,

vehicle key cable, ECU cable, MCU cable, MC9S12 cable.
[list=4]
[*]Cross Signal Pins – holds the MCU board, MCU spare cable or DIY
[/list]
signal inte***ce.
[list=5]
[*]IC Card Induction Area
[*]Vehicle Key Slot – holds the vehicle key.
[*]Transponder Slot – holds the transponder.
[*]Remote Control Transponder Induction Area
[*]Mercedes Infrared Key Slot – holds the Mercedes infrared key.
[*]Status LED – indicates the current operating status.
[*]Locker – locks the EEPROM component transponder slot to ensure
[/list]
proper functioning.
[list=12]
[*]EEPROM Component Transponder Slot – holds the EEPROM plug-in
[/list]
transponder or EEPROM socket.
DC Port
DC Port is used to provide 12 V power supply for the UP400.
USB Port
The Type B USB port provides data communication and power supply for
handheld device, PC and UP400.
DB 26-Pin Port
Five components can be connected to this port: Mercedes Infrared Cable,
APA102 – Remote Match Cable (optional), APA104 – ECU Cable, APA105
– MCU Cable and APA106 – MC9S12 Cable.

  1. APA102 – Remote Match Cable (optional)


[list=2]
[*]APA104 – ECU Cable
[/list]

[list=3]
[*]APA105 – MCU Cable
[/list]

[list=4]
[*]APA106 – MC9S12 Cable
[/list]

Cross-shaped Signal Pin
The Cross-shaped signal pin is used to place MCU board, MCU spare cable or DIY signal cable to read or write MCU and ECU chips.
IC Card Induction Area
It is used to read and write IC card information.
Vehicle Key Slot
It is used to hold the vehicle key to read or write vehicle key information.
Transponder Slot
It is used to hold the transponder to read or write transponder information.
Remote Control Transponder Induction Area
It is used to read and write remote control transponder information.
Mercedes Infrared Key Slot
It is used to hold Mercedes infrared key to read or write Mercedes vehicle key information.
Status LED
The Status Indicator shows the current operating status of the UP400. See the table below for detailed description.

Locker
It is used to place EEPROM chip or socket to read or write EEPROM
information.
What chips UP400 can read and write:
EEPROM Component Transponder Slot
It is used to hold the EEPROM plug-in transponder or EEPROM socket.
EEPROM Read/Write Transponder Coverage:

Chip Type Name Chip Type Name
ATMEL AT24C01 ATMEL AT24C1024
ATMEL AT24C02 ATMEL AT24C128_1.8
ATMEL AT24C04 ATMEL AT24C256_1.8
ATMEL AT24C08 ATMEL AT24C512_1.8
ATMEL AT24C16 ATMEL AT24C01A
ATMEL AT24C32 ST ST24x01/ST25x01
ATMEL AT24C64 ST ST24x02/ST25x02
ATMEL AT24C128 ST ST24x04/ST25x04
ATMEL AT24C256 ST ST24x08/ST25x08
ATMEL AT24C512 ST ST24x16/ST25x16
ST M24C01 ATMEL AT25640
ST M24C02 ATMEL AT25128
ST M24C04 ATMEL AT25256
ST M24C08 ATMEL AT25512
ST M24C16 ATMEL AT25010_1.8
ST M24C32 ATMEL AT25020_1.8
ST M24C64 ATMEL AT25040_1.8
FAIRCHILD NM24C16U ATMEL AT25080_1.8
FAIRCHILD NM24C16UT ATMEL AT25160_1.8
FAIRCHILD NM24C17U ATMEL AT25320_1.8
FAIRCHILD NM24C17UT ATMEL AT25640_1.8
MICROCHIP 85C72 ATMEL AT25128_1.8
MICROCHIP 85C82 ATMEL AT25256_1.8
MICROCHIP 85C92 ST M95010
NXP PCF8582C ST M95020
NXP PCF8594C ST M95040
NXP PCF8598C ST M95080
ATMEL AT25010 ST M95160
ATMEL AT25020 ST M95320
ATMEL AT25040 ST M95640
ATMEL AT25080 ST M95128
ATMEL AT25160 ST M95256
ATMEL AT25320 ST M95512
MICROCHIP 25xx040 NATIONAL NM93C13
MICROCHIP 25xx080 NATIONAL NM93C14
MICROCHIP 25xx160 NATIONAL NM93C14TM8
MICROCHIP 25xx320 MICROCHIP 93C46X
MICROCHIP 25xx640 MICROCHIP 93C46A
MICROCHIP
25xx040_TSS
OP
MICROCHIP 93C46
MICROCHIP
25xx320_TSS
OP
MICROCHIP 93C46AX
MICROCHIP
25xx640_TSS
OP
MICROCHIP
93C46BX_93C46
CX
CATALYST CAT25C01 MICROCHIP 93C56A
CATALYST CAT25C02 MICROCHIP 93C56
CATALYST CAT25C04 MICROCHIP 93C66A
CATALYST CAT25C08 MICROCHIP 93C66
CATALYST CAT25C16 MICROCHIP 93C76A
CATALYST CAT25C32 MICROCHIP 93C76
CATALYST CAT25C64 MICROCHIP 93C86A
CATALYST CAT25C128 MICROCHIP 93C86
CATALYST CAT25C256 ATMEL AT93C46A
ST M35080 ATMEL AT93C46
XICOR X5043 ATMEL AT93C46R
XICOR X5045 ATMEL AT93C56
XICOR X25043 ATMEL AT93C57
XICOR X25045 ATMEL AT93C66
MICROCHIP 93C06 ATMEL AT93C76
ATMEL AT93C86 SONY CXK1011
NATIONAL NM93CS06 SONY CXK1012
NATIONAL NM93CS46 SONY CXK1013
NATIONAL NM93CS56 Seiko S_24H30
NATIONAL NM93CS66 Seiko S_24H30_SOP8
FAIRCHILD FM93CS46T Seiko S_24H45
ST M93C46 Seiko S_24H45_SOP8
ST M93C56 Seiko S_24S30
ST M93C66 Seiko S_24S45
ST M93C76 TOSHIBA TC89101
ST M93C86 TOSHIBA TC89102
ST M93S46 TOSHIBA TC89121
ST M93S56 TOSHIBA TC89122
ST M93S66 Xicor X24C44
ATMEL AT59C11 TMC TMC93LC56
ATMEL AT59C22 TMC TMC93LC57
ATMEL AT59C13 TMC TMC93LC66
OKI M***16911 TMC TMC93LC86
TMC TMC93LC46

Chip Type Name
FREESCALE MC9S12DG128
FREESCALE MC9S12DJ64
FREESCALE MC9S12DG256
FREESCALE MC9S12DT128
FREESCALE MC9S12DT256
FREESCALE MC9S12XDP512
FREESCALE MC9S12XET512
FREESCALE MC68HC08AZ60
FREESCALE MC68HC(9)08AB16A
FREESCALE MC68HC908GR16A
FREESCALE MC68HC(7)05X32
FREESCALE MC68HC705E6
FREESCALE MC68HC11E9
INFINEON SAK-TC1766
INFINEON SAK-TC1793
INFINEON SAK-TC1796
INFINEON SAK-TC1797

UP400 Programmer Test Report:
Check lock status success!


Tech support from https://www.facebook.com/groups/1642064505830743/
 relate products:

2018 OBDSTAR X300 DP Plus 8" Tablet Key Programmer C Configuration full Package Supports ECU Programming:

http://www.chinacardiags.com/wholesale/obdstar-x300-dp-plus-tablet-key-programmer-c-configuration.html

 Lonsdor K518ISE Key Programmer with Odometer Adjustment for All Makes K518 Supports VW 4th&5th IMMO and BMW FEM/BDC:

http://www.chinacardiags.com/wholesale/lonsdor-k518ise-key-programmer-with-odometer-adjustment.html

Original: UP400 Programmer User Manual: Read/Write Data with OtoSys IM600

Admin
Admin

帖子数 : 230
注册日期 : 17-03-28

查阅用户资料 http://xhorsevvdi.666forum.com

返回页首 向下

返回页首


 
您在这个论坛的权限:
不能在这个论坛回复主题