Xhorse vvdi,vvdi2 key programmer
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Lonsdor K518ISE read PIN code + do all keys lost to Peugeot 408 2013

向下

Lonsdor K518ISE read PIN code + do all keys lost to Peugeot 408 2013 Empty Lonsdor K518ISE read PIN code + do all keys lost to Peugeot 408 2013

帖子 由 Admin 周三 十二月 13, 2017 7:29 am

Confirmed! Lonsdor K518ISE http://www.obd2diy.fr/wholesale/lonsdor-k518ise-key-programmer-odometer-adjustment-tool.html works no issues in Peugeot 408 PIN code reading and new key programming when do all keys are lost.

Peugeot key type:

Letf- Folding key (-2013)

Center- Smart remote (2014-)

Right- Folding smart remote (2014-)



PIN code is required for Peugeot key programming

(have the password card, chassis, then read via OBD)

No need disassemble BSI to read PIN code



OBD locoation



Most key programmers support OBD read PIN code with at least one key available

Only some support PIN code reading when all keys are lost

So, how to read Peugeot PIN codes?

Here you go.

Car: Peugeot 408 2013

Device: Lonsdor K518ISE key programmer

Read Pin Code



Type 1: when at least one key aivailable

insert the key and the car start. Repeat Ignition ON/OFF for several times. Go to immo data verification

Type 2: when all keys are lost

it’s normal to see the wiper is working and headlight turns on for 30 aeconds around



Here: Type 2 - Read PIN code when all keys are lost



This function help save a lot for technicians

The biggest advantage for newbies: avoid high risk to disassemble BSI to read PIN

(to change a BSI costs 150 usd, then matching with PP2000 sw)

Read Pin code successfully

All is seondary and easy



Lonsdor K518ISE is being updated every day.

Peupeot 408 in the current version is not available

But go for 308; it’s ok to finish it



Ignition on



Chassis and other numbers, versions



Enter PIN code and check it



Ignition off and on within 15s.



Go to program the seond key if necessary



Repeat remote proggramming, steps:

Step 1 ignition off, then take out the key

Step 2 insert another key, ignition on

Step 3 within 20s, press any button on the remote for 5 seconds

Step 4 ignition off, and take out the key

Step 5 for more keys to be programmed, just repeat step 2-4



Done! Lonsdor K518ISE programmer is able to read PIN code and program a new key to Peugeot 408 2013 when do all keys are lost.

Write by  laura:Lonsdor K518ISE read PIN code + do all keys lost to Peugeot 408 2013

Admin
Admin

帖子数 : 294
注册日期 : 17-03-28

http://xhorsevvdi.666forum.com

返回页首 向下

返回页首


 
您在这个论坛的权限:
不能在这个论坛回复主题