How to Use CGDI Prog MB Mercedes Benz Key Programmer


How to Use CGDI Prog MB Mercedes Benz Key Programmer

帖子 由 Admin 于 周一 十月 09, 2017 8:09 am

CGDI Prog BMW MSV80 BMW CGDI Prog Car Key Programmer

Note: CGDI Prog newly add bmw FEM\BDC functions, you need to pay 160USD to get this authorization. buy here: SK222-S

Top 8 Reasons To Get CGDI Prog BMW MSV80:
1.High technical tool which mainly support  Auto diagnose, programming and security maintenance 3 in 1.
2.Support Key Programming for BMW CAS1/CAS2/CAS3 ,and Support Key Matching and All key lost for CAS4 /CAS 4+;
3.Support BMW Key Programming with OBD Functions
4.Software response fast, short time programming, and new breakthrough in operation safety and technical support.
5.Supported Languages: Chinese, English
6. Certification: CCC,CE,GS, CCC,CE,GS,ISO
7. Warranty:1 year
8 Update: half year
How to Use CGDI Prog MB Mercedes Benz Key Programmer

Step 1: Click on “Lock (EIS)

Step 2: Click on “Read EIS data”

Step 3: Click on “Computer Password”, then click on “Copy key with key”

Step 4: Click on “Other Keys” (One generation of key 705E6 key), then click on “OK”.

Step 5: Please insert the key into EIS and click OK.

Step 6: Please insert the key into the device and click on OK!

Step 7: Collecting the data, do not remove the key.

Step 8: Please insert the key into EIS and click OK.

Step 9: Please wait for 7 seconds.

Step 10: Please pull out the key from the EIS, and then click OK!

Step 11: Please insert the key into the EIS again and click OK!

Step 12: Unplug the key for 5 seconds, then insert the EIS, then click OK!

Step 13: Save the generated files.

Step 14: Please insert the key into the device again and click OK

Step 15: Please save the data in new name.

Step 16: Click on “Upload Data”

Step 17: Click on “Open”

Step 18: Upload data successfully, please click the “Query Results” button to query.

Step 19: Click on “Query result”

Step 20: Display Query time.

Step 21: Query end.

Step 22: click on “Copy” then “Lock (EIS)

Step 23: click on “Paste”.

Step 24: Check password if correct or not, then click on “Save EIS data”.

Step 25: click on “Save”.

Step 26: click on “Confirm”, then “Generate EE”

Step 27:  Load EIS data.

Step 28: Click on “Open”

Step 29: generate key file.

Step 30: Click on “Save”

Step 31:Click on “Read/write key”, then “Confirm”.

Step 32: Write BE key click on “IR (IR is the key hole on the CGDI MB pro). NEC adapter: use for writting original key including smart key

(How to: remove the chip to weld)

Step 33: Click on “Read key / chip”, then “Open/write”

Step 34: Select chip type.

Step 35: Note: Smart key please choose 41 format, common key and BE key please choose 51 format!

Step 36: Select the location of writting key, then click on “Open”.

Step 37: Write key success!

Step 38: Password display area, write down the password manually.

BE key read password directly, no need to collect data!


帖子数 : 230
注册日期 : 17-03-28


返回页首 向下