How to use VVDI2 program BMW FEM/BDC keys


How to use VVDI2 program BMW FEM/BDC keys

帖子 由 Admin 于 周四 八月 17, 2017 11:49 am

VVDI2 4.3.0 now is verified to work no issues with the BMW FEM/BDC system.Here is simple guide about VVDI2 Program BMW FEM/BDC Keys.

If you have condor mini key cutting machine,provide your serial number,add VVDI2 BMW FEM/BDC authorization price is 600USD.If without condor key cutting price is 800USD.

VVDI2 BMW 4.3.0 Learn keys & Erase keys to the BMW FEM/BDC system

step 1:

1. read FEM/BDC coding via OBDII or on the bench

2. you'd better not close this window after starting this procedurestep 2:

1. open FEM/BDC shell, find out where the 95128/95256 chip is, read EEPROM dump via BDM programmer

2. load original EEPROM dump and save special EEPROM dump, write special EEPROM dump back to the 95128/95256 chip

3. restore FEM/BDC shell, provide -12v and connect it via OBDstep 3:

1. this operation requires connecting FEM/BDC on the bench, and make sure you finish step 1 ans step 2

2. provide +12v to FEM.BDC and connect it via OBDstep 4:

1. open FEM/BDC shell, write original EEPROM dump (read step 2) back to the 95128/95256 chip

2. restore FEM/BDC shell and connect it via OBDstep 5:

loading coding file (read step 1), write to FEM/BDC via OBDII, finish FEM/BDC programming

VVDI2 - BMW FEM/BDC system(function released and available, just no user manual)

Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys) make new key with ignition switch(support add spare key and all key lost, all key lost require ISN) reset FEM/BDC KM(cluster require reset manually) erase key(after erase the key position become blank position) backup coding restore coding


1.backup coding and restore coding can direct operation generally.

2.add keys, reset KM, erase key must programming FEM/BDC system first FEM/BDC inte***ce, if 'get key info' the type not support, it will show:customer should use "BMW E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-BMW

4.when operation on 'programming FEM/BDC system'inte***ce,please don't close this software window until all procedures completed.

5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.

6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car

or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system

7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.

Reset KM to the BMW FEM/BDC system

Have backup coding, restore coding of the FEM/BDC system

Attention: FEM/BDC Key Learn is an option function, it require buy license or exchange with bonus points. Contact your dealer for help!

1.VVDI2 BMW FEM/BDC Function Authorization Service:

2.VVDI2 BMW FEM/BDC Function Authorization Service For Condor Cutter Only:

original article: How to use VVDI2 program BMW FEM/BDC keys


帖子数 : 146
注册日期 : 17-03-28


返回页首 向下